Slowloris DoS

This looks like it could be some fun... and some trouble. As of yet, Apache has no patch. Too bad it doesn't work for IIS, however given my personal experience, IIS doesn't need a DoS attack to be brought down, just let it run for an hour, and it'll eventually crash

iptables complete

So after a weekend primarily away from my computer (probably for the better :-) I had the chance to sit down and work out iptables. Although the Gentoo Wiki article was helpful in getting the kernel configured correctly, I did not want to write an iptables start script- after all, iptables is a service, so why not utilize it as such? Instead, I used Linux Home Networking's tutorial to create my own firewall script, complete with logging. I was also fortunate to reference a pre-built firewall script, authored by a friend and coworker, that he uses as a standard template for all of his RHEL5 servers at UGA.

I created three chains, LOG_DROP, LOG_ACCEPT, and LOG_REJECT, to log packets when needed. I did not use LOG_DROP, nor LOG_REJECT (maybe in the future?), and instead am just using REJECT with --reject-with tcp-reset for TCP packets and icmp-port-unreachable for UDP packets to help mask the fact that I'm using a firewall. If the packets are simply dropped, it'd be pretty easy for an intruder to realize that I'm running a firewall because his packets would not result in the standard --tcp-reset or icmp-port-unreachable to indicate a nonexistent service. In the future, I may consider logging some of the rejected packets.

Right now the only services I am logging when accepted are SSH & SFTP (both use port 22), as logging every http request is impractical.

Unlogged accepts include http (port 80) and SAMBA (netbios-ssn, microsoft-ds, UDP 137 & 138). One key problem I had was allowing SAMBA to continue to work with the firewall enabled. With iptables running, I could only access my SAMBA shares by using the machine's IP, and not its hostname. While this problem was frustrating, it forced me to better manage my system by ensuring that samba was configured correctly (/etc/samba/smb.conf), my hostnames were set properly (it was not- only localhost was set in /etc/hosts), as well as resolv.conf (/etc/resolv.conf). This forum post eventually led me to realize that I needed to accept traffic on ports 137 & 138 on top of netbios-ssn (UDP 139), and microsoft-ds (TCP 445).

Further securing SAMBA, I specified the allowed source IPs on my network, both within smb.conf and iptables. If there's anything I've learned, its that redundancy in terms of security is never a bad idea.

Below is a (modified) iptables firewall script:

#!/bin/bash

# Stateful firewall for hostname

########################
# Ethernet Information #
########################

# Device: lo
# IP: 127.0.0.1
# Hostname: localhost

# Device: eth0
# IP: 192.168.2.3
# Hostname: hostname

# Flush all tables
iptables -F

# Remove all non-default cahins
iptables -X

#+-------------------------------+
#| Setup Firewall Process chains |
#+-------------------------------+

# Create a LOG_DROP chain for dropped incoming requests to be logged
iptables -N LOG_DROP
iptables -A LOG_DROP -j LOG --log-level info --log-prefix "Firewall-LOG_DROP: "
iptables -A LOG_DROP -j DROP

# Create a LOG_REJECT chain for rejected incoming requests to be logged
iptables -N LOG_REJECT
iptables -A LOG_REJECT -j LOG --log-level info --log-prefix "Firewall-LOG_REJECT: "
iptables -A LOG_REJECT -j REJECT

# Create a LOG_ACCEPT chain for accepted incoming requests to be logged
iptables -N LOG_ACCEPT
iptables -A LOG_ACCEPT -j LOG --log-level info --log-prefix "Firewall-LOG_ACCEPT: "
iptables -A LOG_ACCEPT -j ACCEPT


# Accept all connections from localhost
iptables -A INPUT -i lo -j ACCEPT

# Accept reply packets
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

# Accept PING requests
iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT

#+-----------------------------------+
#| Accepted services that ARE Logged |
#+-----------------------------------+

#SSH & SFTP (TCP)
iptables -A INPUT -p tcp --dport ssh -j LOG_ACCEPT

#+---------------------------------------+
#| Accepted services that are NOT Logged |
#+---------------------------------------+
# HTTP (TCP)
iptables -A INPUT -p tcp --dport http -j ACCEPT

# HTTPS (TCP)
#iptables -A INPUT -p tcp --dport https -j ACCEPT

# TOMCAT (TCP)
#iptables -A INPUT -p tcp --dport 8080 -j ACCEPT
# If we're only using TOMCAT (no apache), we can forward traffic to 8080
#iptables -t nat -A OUTPUT -d localhost -p tcp --dport 80 -j REDIRECT --to-ports 8080
#iptables -t nat -A OUTPUT -d hostname -p tcp --dport 80 -j REDIRECT --to-ports 8080
#iptables -t nat -A PREROUTING -d hostname -p tcp --dport 80 -j REDIRECT --to-ports 8080

# RAILS (TCP)
#iptables -A INPUT -p tcp --dport 3000

# netbios-ssn (UDP)
#iptables -A INPUT -p udp --dport netbios-ssn -j ACCEPT
iptables -A INPUT -p udp --source 192.168.2.0/24 --dport netbios-ssn -j ACCEPT

# netbios-ssn (TCP)
#iptables -A INPUT -p tcp --dport netbios-ssn -j ACCEPT
iptables -A INPUT -p tcp --source 192.168.2.0/24 --dport netbios-ssn -j ACCEPT

# microsoft-ds (TCP)
#iptables -A INPUT -p tcp --dport microsoft-ds -j ACCEPT
iptables -A INPUT -p tcp --source 192.168.2.0/24 --dport microsoft-ds -j ACCEPT

# microsoft-ds (UDP)
#iptables -A INPUT -p udp --dport microsoft-ds -j ACCEPT
iptables -A INPUT -p udp --source 192.168.2.0/24 --dport microsoft-ds -j ACCEPT

# nmbd (UDP) required for SAMBA to send requests via broadcasting
iptables -A INPUT -p udp --source 192.168.2.0/24 --dport 137:138 -j ACCEPT
#iptables -A OUTPUT -p udp --dport 137:138 -j ACCEPT

# LOG & Drop malicious IPs
#iptables -A INPUT --source xxx.xxx.xxx.xxx -j LOG_DROP

# Reject remaining packets, do so with tcp-reset and icmp-port-unreachable
# so hackers don't know we're running a firewall
iptables -A INPUT -p tcp -i eth0 -j REJECT --reject-with tcp-reset
iptables -A INPUT -p udp -i eth0 -j REJECT --reject-with icmp-port-unreachable

I really enjoyed this project and learned a lot. After getting my basic firewall set up, I feel confident that I could do it again, now that I understand most of the iptables flags and commands
NAT translation and masquerading may be a project for a different day, but at least now I'm familiar with what they are and how they work.

Furthermore, I think this project will serve as a good segway into my next one, which is better learning SAMBA and how to configure it.

IPTables

It is high time I really sat down and figured out IPTables. Similar to my experience with SAMBA, I've used IPTables in the past, though I was more just shooting in the dark than masterfully configuring my ever-important firewall.

I think I'll get started on this first, as it is 1.) interesting 2.) important, and 3.) something I should have done a long time ago.

So, my initial project line-up as of right now is as follows:

1.) Learn how to properly and diligently manage ip tables
2.) Explore SAMBA further and get it working pristinely at my home set up
3.) Set up SSHFS and figure out how to use keys instead of tunneled clear-text passwords

Some useful links to aid me in my quest:
Gentoo-Wiki HOWTO_IPtables_and_stateful_firewalls
IP Tables Tutorial